Views:10 Author:Site Editor Publish Time: 2020-07-29 Origin:Site
To the layman, the words “pipe” and “tube” appear to refer to the same thing, and they are frequently used interchangeably when describing any kind of long cylinder. There are, however, several important differences between pipes and tubes, and it’s important to know these differences when determining the requirements for your particular project.
The way tubes and pipes are measured is probably the main difference between them. Pipes are used primarily for the transport of gases and fluids such as oil, water and propane, among others. For this reason, the inside (or nominal) diameter is critical, as it indicates how much liquid or gas can flow through the pipe. Pipes also have a pressure rating, which is important as the measurement must fall within the accepted transport or distribution pressure range.
Tubes on the other hand are often used in areas where the outside diameter (OD) and wall thickness are critical – such as in medical applications, construction and the military. The measured OD and stated OD are generally within very close tolerances of each other, and it is these tight manufacturing tolerances which help contribute to the higher cost of tubing vs piping.
Pipes are always round. Always! Tubes, however, can come in a variety of shapes – including round! – but can also be rectangular or square. So if you think you need a square steel pipe, you actually need a tube!
Pipes are usually much bigger than tubes, and can accommodate applications from about 1cm to a couple of meters in diameter. Tubes are usually used for applications requiring much smaller diameters. It’s common to find 25cm pipes, but rare to find 25cm tubes.
Because pipes are used to carry liquids and gases, it’s important that there are no leaks. This is why they are usually seamless. Tubes, on the other hand, are usually seam welded as they are often used in structural, weight bearing applications. This is why they are inherently stronger than pipes.
In addition to offering expert pipe rolling services, Minstar Steel are also stockists of instrumentation tubing, among many other products. So whether you need tubes, pipes or any other stainless steel product, contact us today to explore our full range.